Home
About Us
Products
Business
Equipment
Download
News
Contact

Home page

Linear Guide Use FAQ Point Summary

2024-02-19

Size

Linear guide as an important transmission parts of mechanical equipment, in now more and more popular automation equipment, the use of linear guide will be more and more, and the use of linear guide common problems will be more and more, the problem is used to solve. Yaweida transmission small editor, let's do a feedback summary of common problems in linear guide rail use with friends.

With the precision transmission accessories linear guide, in the development trend of automation technology industry, it is very necessary to grasp some common difficult problems of linear guide, and grasp a large number of professional knowledge about linear guide, which is beneficial to us in dealing with linear guide, and get timely and effective treatment when encountering difficulties, so as to better apply linear guide

Linear guide using common problem points:

1. After a period of operation, it may be found that the track of the linear guide rail has imprint indentation, and the slider steel ball is cracked. What is the reason?

Generally, due to excessive load, the steel ball leaves the track, resulting in steel ball cracking leading to continuous damage to the track. It can operate and replace large-scale sliders, such as 20 ones, to 25 ones, or increase the number of sliders, reduce the external load, and change the installation method to reduce the bearing capacity of one side. If the reason comes from lubrication, you can try to choose another kind of lubricating oil, increase the amount of lubricating oil, and reduce the wetting spacing. Be sure to check frequently whether there are unclean things entering the wood. If there are unclean things entering, you need to improve the sealing parts or add dust-proof parts.

2. Why does the steel ball fall out after the slider operates for a period of time?

The iron pin falling from the bead groove causes the steel ball to damage the end of its service life, causing the steel surface to be tired and overloaded. Perhaps it is due to too much load, incorrect installation or only one side bearing the force distance. These conditions may cause the steel ball to fall off.

3. After walking the slider for a period of time, it is found that the bearing end cover and the end antifouling are deformed or cracked?

If the installation method is wrong, only one side between the slider and the track will bear the force, or it may be damaged by external force, which may lead to deformation or cracking of the bearing end cover and end anti-fouling. If the internal part of the slider is poor, the anti-fouling system can be changed, other lubricating grease can be replaced, and the amount of lubricating oil can be added to reduce the lubricating time interval. When installing, pay attention to the difficulty of the installation perspective. The improvement of the product configuration needs to be installed by a professional technical engineer to avoid harming the linear guide slider.

The above feedback summary on the common problems in the use of linear guide rails is only a part of the common problems encountered in daily work. Friends are welcome to add or contact Yaweida to discuss learning and growth together.

Key words:

Ball screw

Slider

None

Application of Linear Guide in Iron and Steel Industry

None

Application of Linear Guide in Iron and Steel Industry